Polishing Nickel Plate?

Discussion in 'Trumpet Discussion' started by LH123, May 18, 2011.

  1. LH123

    LH123 Piano User

    275
    25
    May 14, 2010
    Hey all! I play a nickel plated trumpet. Is there a way to polish the finish in a way similar to the aluminum foil method used for silver plated instruments? I don't want to take off any more metal than necessary. :play:
     
  2. Phil986

    Phil986 Forte User

    1,094
    329
    Nov 16, 2009
    Near Portland, OR.
    I was wondering about the same thing but I don't even know about the aluminum foild method. What is it?
     
  3. LH123

    LH123 Piano User

    275
    25
    May 14, 2010
    Search for "aluminum foil" and lots of info comes up. Here's one description:
     
  4. HiDef

    HiDef New Friend

    6
    0
    Sep 11, 2009
    The description is for removing the tarnish from silver through an electrochemical reaction. Sort of the reverse of electroplating. It works, but not really well. It does not remove any metal (silver) so it does not modify the finish, but if the silver isn't bright to begin with, it won't be after removing the tarnish either. It will not work for nickel because the chemistry is different. And nickel is an extremely hard and passive metal (compared to brass and silver, at least). About all you can do is hand-polish the nickel. Don't worry. It will take A LOT of polishing to remove much metal. It is a misconception that hand polishing will remove the metal. It takes a buffing wheel and compound to do that.
     
  5. rowuk

    rowuk Moderator Staff Member

    Age:
    61
    16,611
    7,953
    Jun 18, 2006
    Germany
    The silverplate on a horn is generally very thin. That is why regular cleaning and a salt water/aluminum foil bath make sense. Hand polishing silver plate can easily remove "too much" - especially at the contact points.

    Many horns with nickel (german silver) or nickel plated parts are also lacquered. This means that window cleaner and a soft cloth work just fine.
     
  6. amzi

    amzi Forte User

    1,378
    760
    Feb 18, 2010
    Northern California
    Back in the olden days cars used to have chrome plated metal bumpers. They still make specialty products to clean and polish chrome and that will work fine of nickel.
     
  7. turtlejimmy

    turtlejimmy Utimate User

    5,065
    1,005
    Jun 6, 2010
    Oregon

    For the ultimage in protection, the Connstellation starts with copper plating, then puts nickel plating over that and finishes with a coat of lacquer. It always looks perfect ....... unlike my Severinsen, which needs constant attention to look really shiny. A soft cloth is only needed once in a while.

    I wonder why it's not more common (nickel plating).:dontknow:

    Turtle
     
  8. tedh1951

    tedh1951 Utimate User

    7,797
    2,356
    Oct 18, 2007
    The Wide Brown Land
    It's harder, probably more expensive, and just a little poisonous.
     
  9. LH123

    LH123 Piano User

    275
    25
    May 14, 2010
    Thanks for all the replies! BTW, my trumpet is not lacquered over the plating (I checked this with a continuity tester). Would Flitz metal polish harm the plating?
     
  10. turtlejimmy

    turtlejimmy Utimate User

    5,065
    1,005
    Jun 6, 2010
    Oregon

    Poisonous???

    Turtle:shock:
     

Share This Page