TrumpetMaster - View Single Post

Liad Bar-EL · 07-13-2006, 05:35 AM

Taylor Chicago II Specs:

Bore size: .470"

Valve Block: Heavy casings, Recessed top caps, weighted bottom caps

Valve pistons: Stainless steel sleeves

Mouthpipe taper: Medium/fast

Mouthpipe construction: Machined from one piece of free-machining brass

Man tuning slide bow: 100% thicker than normal, annealed, offset C shaped

Finger Buttons: Titanium

Bell diameter: 5 1/2/140mm

Bell material: Red Brass 90/10 (copper/zinc ratio)

Bell construction: 2 piece, 50% thicker than normal, oversized rim thickness, partially annealed, built in 'choke'

Horn weight: 1.625 kg/ 3lb 9oz

All of this from a good family man. Who in the trumpet makers world would put a picture of himself with his son on his web site?

http://www.taylortrumpets.com/choose.html

I play with a custom mpc, Gianni Amidei (gianniamidei@tele2.it)

07-13-2006, 05:35 AM	#7 (permalink)
Liad Bar-EL Forte User Join Date: Oct 2003 Location: Jerusalem, Israel Posts: 1,168	Taylor Chicago II Specs: Bore size: .470" Valve Block: Heavy casings, Recessed top caps, weighted bottom caps Valve pistons: Stainless steel sleeves Mouthpipe taper: Medium/fast Mouthpipe construction: Machined from one piece of free-machining brass Man tuning slide bow: 100% thicker than normal, annealed, offset C shaped Finger Buttons: Titanium Bell diameter: 5 1/2/140mm Bell material: Red Brass 90/10 (copper/zinc ratio) Bell construction: 2 piece, 50% thicker than normal, oversized rim thickness, partially annealed, built in 'choke' Horn weight: 1.625 kg/ 3lb 9oz All of this from a good family man. Who in the trumpet makers world would put a picture of himself with his son on his web site? http://www.taylortrumpets.com/choose.html I play with a custom mpc, Gianni Amidei (gianniamidei@tele2.it)